Description
Used 15mm steel spindle, that has been cleaned and had fresh zinc professionally applied.
Maximum overall length is 227mm.
Shaft diameter is 15mm.
Shaft length including thread is approximately 173mm.
Shaft length is approximately 140mm.
Threaded section is 33mm.
The shoulder diameter is 20mm and is approximately 53mm long and this includes the hex head section which is also cross drilled and counter bored. If you don’t include the hex section the shaft is approximately 45mm long.
The axle threads into a sleeve nut which is included. The nut would be captive in your fork leg and you’d screw the axle into it.
The maximum overall length of this component is 57.5m long, the 20mm section is 40mm long and the 25mm section is 17.5mm long
Only one available.
