Description
These fork springs have been replicated from a set that were in a set of 35mm Marzocchi that is used in anger in classic scrambles.
They fit inside 35mm forks that have an internal bore of 29mm which makes the suitable for many applications including; Ceriani, Betor, Marzocchi etc.
Ends are ground to match the original spec. Overall length is 485mm.
If you need them to be longer, Marzocchi used spacers underneath the fork nut to take up the gap. You can also make the spacers longer to add pre-load to the spring should you so desire. eriani and Betor also used the same approach.
You are buying a pair (two springs)
(Please note : They will not work inside the very early Ceriani tubes that had a restrictor down inside the tube. That style tube will only allow you to use smaller diameter springs and these will not fit, so please check. Cz had a very similar spring which has a smaller outer diameter. If in doubt please ask).
