Description
Used 17mm steel spindle, that has been cleaned and had fresh zinc professionally applied.
Maximum overall length is 300 mm with a shoulder at one end that has through hole passing through it.
Shaft maximum length is approximately 275 mm long from the underside of the head to the end of the threaded section.
The 17mm section of the shaft 147 mm then it reduces down to 15 mm and the length of this part of the shaft is 99 mm.
The 17mm section has some corrosion just under the head, this part of the shaft would be in the swinging arm rather than the bearing. I think it is fine to use, put please ask for more information if you are unsure and what to check. I can provide more images if required.
Threaded section is approximately 30mm long.
Only one available.
